This is the Futaba 10JA 2.4GHz 10-Channel S/FHSS Radio System with the R3008SB Receiver. The 10J 2.4GHz transmitter is "full range".

This is the airplane version which will default to airplane settings, with mode 2 stick operation when powered up and has a ratcheted throttle stick.

• Ten channels include one variable knob, five 2-position switches, two 3-position switches, one momentary switch, two digital levers
• Assignable switch/lever/functions (ch. 5-10)
• T-FHSS system with telemetry
• Airplane, helicopter and glider/sailplane functions in the software
• User-updatable software (requires optional CIU-2 interface, FUTM0951)
• SBus programmable port
• Jog dial and three buttons for fast easy programming
• Transmitter also compatible with all Futaba SFHSS air receivers
• Synthesized voice with telemetry data
• Vibration function for use with low battery or warning set ups
• Voice output
• 128x64dot LCD screen with backlight
• 30 model memory
• Throttle cut
• Servo cycle with bar graph displays
• R3008SB T-FHSS telemetry receiver with external voltage port, S.Bus and S.Bus2 compatibility, 8 pwm ports
• Trainer system
• Large 128x64 dot backlit display
• One year limited warranty through Hobby Services beginning at date of purchase Airplane Menu:
• 6 programmable mixes
• 9 factory-defined mixes
• Flaperons with differential rate
• Flap trim
• Differential ailerons
• Gyro sensitivity
• 5-point throttle and pitch curves
• Throttle delay
• Idle down Glider Menu:
• 6 programmable mixes
• 3 factory defined mixes
• 5 wing types
• Gyro sensitivity
• Motor menu
• 2 flight conditions Heli Menu:
• 6 programmable mixes
• 10 factory defined mixes
• 8 swash plate types
• 5 flight conditions w/delay
• Throttle curve (4 curves, 5 points)
• Pitch curve (5 curves, 5 points)
• Throttle hold and delay
• Swash AFR
• Electronic swash ring Multi-Rotor Menu
• 6 programmable mixes
• Gyro sensitivity/mixing
• Center stick alarm

• Futaba 10JA 2.4GHz 10-Channel S/FHSS Transmitter
• R3008SB Receiver, FUTL7685
• Switch Harness
• Neck Strap
• Instruction Manual

• 4 "AA" Alkaline batteries
• Servos of your choice

• Transmitter
• Type: 2-stick, 10 channel, T-FHSS Air-2.4GHz system
• Transmitter Frequency: 2.4GHz band
• System: T-FHSS Air, S-FHSS, switchable
• Power Supply: 6.0V dry battery
• R3008Sb Receiver
• Type: T-FHSS Air-2.4GHz, dual antenna diversity, S.BUS system
• Power Requirement: 4.8-7.4V battery or regulated output from ESC*
• Size: 0.98 x 1.86 x 0.56" (24.9 x 4703 x 14.3mm)
• Weight: 0.36oz (10.1g)
• Battery F/S Voltage: Sets up with transmitter
• *When using ESCs make sure the regulated output capacity meets usage
• application

• To use the NiMH battery FUTM1482, you will need to purchase the Futaba HBC-3B(4) charger, FUTM1832. If you already have a charger and need a charge lead, contact Hobby Services and order part number HSP29615. (requires soldering on the correct charger plugs) You may also use a 2C 6.6V LiFe battery such as HCAM6521